Are you ready for this winter’s snow? One way to get ready is to get a set of Snow Tracks for your rig. New from T-Bone Racing are snow tracks for Traxxas 2wd vehicles. The new TBR tracks were designed for snow, sand, or dirt driving. Have a look at these features- * Fits 2wd […]
Fonte: Big Squid RC.

F.V.S.S. Racing have announced the release of the Project RC easy start platforms for the popular Hudy nitro engine starter box. The inserts are designed to perfectly match with the chassis outlines to make for self-centring ability and thus easier, faster and more convenient engine starting. The platforms are available for the most popular 1/8th and 1/10th on-road kits.

Source: FVSS [fvssshop.it]

The post Project RC Hudy starter box easy start inserts appeared first on Red RC.

Fonte: RED RC.

Monaco RC have introduced new colours and sizes of their popular high-quality zipped bags. Based on the previous S 16x12x7cm “S” and 22x17x7cm “M” bags two different alternatives were developed per variant and it is now possible to have three versions of the “S” and “M” bags with three heights and three different colours options. The 5cm and 7cm tall S bag allow to store LiPo shorty batteries, motors, a Diff Check or similar equipment while the 9cm variant can be used for chargers etc. As for the 5cm tall 22x17cm M bag it is ideally used for batteries while the 7cm bag takes chargers such as the iCharger 406. The 9cm tall bag allows to store and transport an iCharger 406 including wires and accessories.

Source: Monaco RC [monacorc.com]

The post Monaco RC introduce new carrying bags appeared first on Red RC.

Fonte: RED RC.

The latest 1/8th buggy to receive Leadfinger Racing’s A2.1 Tactic body shell treatment is the Agama A319. First introduced in mid-2019, the A2.1 Tactic body design has proven itself on the track with a handful of different platforms. Fitment, performance and looks are key in every design, and every platform presents different challenges with each layout. The Agama was no exception. Fuel tank location, and the position of throttle and brake bias linkages needed to be taken into consideration. LFR were looking for a low profile and sleek design to fit the A319 perfectly. The designers were able to combat these differences by stretching the rake of the windshield and adding to the size of the side pod scoops for just the right amount clearance. To keep performance in check, additional down force was added to the rear of the side pods and rear centre of the body. As things started to come together, Leadfinger Racing topped off the cab with a shark fin for stability. To finish off the design the body includes a front scoop for even more tuning ability. As usual the body comes moulded from high-quality polycarbonate material and it includes window masks and a decal sheet.

Source: Leadfinger Racing [leadfingerrc.com]

The post Leadfinger Racing A319 A2.1 Tactic body shell appeared first on Red RC.

Fonte: RED RC.

The folks from JConcepts have just announced the JCI Creep Scale Crawler Body. The Creep has a 12.3″ wheelbase that makes it an easy install on a wide variety of scale crawlers, plus it has a tough off-road look. Here are more details- * Formed from a heavy duty polycarbonate * Comes with window masks […]
Fonte: Big Squid RC.

Available soon from JConcepts is the Aqua compound Detox 1/8th buggy tyre. Designed for demanding track conditions, the closely spaced tread creates the ultimate long main event tyre and combined with the compounds such as blue, green, R2, O2O2 and Y2 and now, aqua gives racers an option for just about any temperature requirement. The design revolves around the centre structure which has hefty lugs arranged in a stacked configuration. The lugs have strategically placed cuts and grooves to allow flex in dusty conditions to perform even if the track is deteriorating while a long main is in progress. The outer portion of the tread fits together like building blocks, with shapes placed together that nest well but also work together to flex laterally to provide steadfast side-bite. The tread tapers off cleanly to the outer side-wall giving a smooth transition during hard cornering. The tyre comes including Dirt-Tech closed cell inserts.

Source: JConcepts [jconcepts.net]

The post JConcepts Detox Aqua compound 1/8th buggy tyre appeared first on Red RC.

Fonte: RED RC.

Coming soon from Destiny and made for the newly introduced RX-10SR 2.0 touring car are several useful optionals. The range includes an aluminium flex version main chassis for higher bite track conditions, a high flex upper deck made of 2.0mm carbon fibre which is a nice option to adjust overall chassis flex, an upper deck flex adjuster set to further fine-tune flex balance, as well as a 3-piece aluminium steering limiter set, titanium-coated 47mm DCJ dual joint front driveshafts and also titanium-coated spring steel rear driveshaft dogbones. All parts are direct fits and they will be up for grabs very soon.

Source: Destiny [destinyracing.jp]

The post Destiny introduce first RX-10SR 2.0 option parts appeared first on Red RC.

Fonte: RED RC.

JConcepts have introduced the 2.2” 2WD and 4WD front tyre variants of their popular Ellipse tread. The Ellipse, named after the centre bar built into the tread, is a compliment to successful tyres such as the Dirt Webs and Space Bars. The “web” style tyre was built to compete on smooth high-grip indoor and outdoor surfaces which require a finely detailed connected bar pattern. The centre section of the tire is a home run utilising a diamond “home plate” footprint to provide massive surface area for better footprint and increased longevity. The web of extensions are unique and have a directional touch giving the racer the ultimate tune-ability. Jason Ruona explains, “The Ellipse front tire has a slightly wider carcass, it allows the driver to attack high-speed sections with more comfort and smooths the steering of a 2WD buggy. The “home plate” and connected web of tread has a large footprint and 1000’s of edges to produce steering connection. Connected tread wears together which is useful racing indoors where a racer requires surface area to produce steering.” The Ellipse tyres are available in a huge selection of compounds such as blue, green, aqua, gold and the ROAR National Champion, silver compound. Included in each package, the Dirt-Tech closed cell inserts known for their durable nature and grey colour complete the race tuned package.

Source: JConcepts [jconcepts.net]

The post JConcepts Ellipse 2.2” 2WD & 4WD front tyres appeared first on Red RC.

Fonte: RED RC.

RudeBits have introduced the lightweight variant of their popular R2.1 1/10th off-road rear wing for 2WD and 4WD buggies. The R2.1 has been designed for a slick look with plenty wheel clearance and it was extensively tested to provide better cornering ability. Its straight rear edge allows the air to force down evenly across the rear and it features a built-in 4 degrees base angle. Made from lightweight polycarbonate material the wing weighs in at only 16g.

Source: RudeBits [rudebits.co.uk]

The post RudeBits R2.1 lightweight off-road rear wing appeared first on Red RC.

Fonte: RED RC.

Coming from Xray and made for the X12 2020 1/12th scale pan car is a 2.0mm aluminium main chassis plate. The chassis is made of strong 7075-T6 aluminium and it is best used on high to very high-bite US-style tracks where the reduced torsional flex helps with car stability while offering more corner speed and countering traction rolling. The main plate comes black anodised, sports machined silver edge details in the cut out sections and also a laser-engraved Xray logo.

Source: Xray [teamxray.com]

The post Xray X12’20 2.0mm aluminium main chassis plate appeared first on Red RC.

Fonte: RED RC.

Rêve D from Japan have introduced their new Absolute 1 brushless motor for 1/10th RWD drift cars. Available in 10.5T and 13.5T specification the motor features a powerful stator and a high-response rotor, making it ideal for the 2-wheel drive drift car classes. Above motor is still a prototype with the final product hitting stores end of January, beginning of February 2020.

Source: Rêve D [teamreved.com]

The post Rêve D Absolute 1 drift car motor appeared first on Red RC.

Fonte: RED RC.

The Ohio RC Factory of Jeffersonville, Ohio held their 1/8 Turkey Race last Saturday, attracting over 60 entires. In 1/8th Pro Nitro Buggy it was Xray’s Paul Ciccarello with the overall TQ, however it was 3rd place qualifier, Serpent’s Adam Johnson with the win in the 20-minute A-main event, leaving behind Paul in 2nd some 6.8 seconds back. 4th place qualifier, HB Racing’s Scott Kuchler came in 3rd, a lap behind Paul and Adam.

In the Pro E-Buggy class Joey Bourdon would top qualify from Adam Johnson in 2nd. Joey then suffered issues in the mains, making way for Xray’s Jeff Switzer who would take the win from Paul Ciccarello in 2nd and TLR’s Jordan Metz in 3rd.

Source: Xray [teamxray.com]

The post Johnson & Switzer win at ORCF 1/8 Turkey Race appeared first on Red RC.

Fonte: RED RC.

Round 2 of the NWN Winter Series was held at the North West Nitro club in Blackpool, United Kingdom over the weekend. HB Racing’s Graham Alsop took a popular win in the 1/8th Nitro Buggy class, leaving behind HB Racing’s Nick Cox in 2nd, some two laps down. Tekno RC’s Mitchell Booth came in 3rd some nine seconds behind Nick while Chris Sharpe-Simkiss completed the 27-laps club some 13 seconds behind Mitchell.

Source: Answer RC [answer-rc.com]

The post Graham Alsop successful at NWN Winter Series Rd2 appeared first on Red RC.

Fonte: RED RC.

Urban RC of Singapore held their Zombie Christmas Fun Race last weekend in several electric on-road classes including Touring, FWD, M-chassis, Truck and Formula. In Touring 17.5T, that attracted nearly 30 drivers alone, it was Yokomo’s Nicholas Lee with the overall TQ from Xray’s Dominic Quek on the runner-up spot. Nicholas went on to dominate the A-mains also and with wins in A1 and A2 we secured himself the overall victory with one leg to spare as Dominic cemented his overall runner-up spot with a win in A3. Xpress’ Esmail Apandi would round out the overall top 3 results.

Source: Dash [dash-rc.com]

The post Nicholas Lee wins at Zombie Christmas Fun Race appeared first on Red RC.

Fonte: RED RC.

Yokomo have released first images and information on their forthcoming new BD10 mid motor electric touring car kit. Building on the BD9 and featuring the now en vogue mid layshaft/mid motor drivetrain configuration, the car is meant to offer optimised overall balance, improved acceleration due to equal length drivetrain belts as well as maximised traction due to using 2mm longer front and rear lower arms. The chassis allows for various flex settings by using inline braces to adjust pitch and roll flex. Full information will become available in time of the release that is scheduled for end of December, beginning of January.

Source: Yokomo [teamyokomo.com]

The post Yokomo BD10 mid motor touring car – Coming soon appeared first on Red RC.

Fonte: RED RC.

GForce have introduced their new Pro tyre warmer and a battery warmer box. Starting with the tyre warmer, the new Pro variant offers a compact main unit with back-lit display, individually adjustable tyre temperatures as well as adjustable acoustics, minimum temperature and safety timer. The main unit is powered by 12VDC to 18VDC or by using a 4S LiPo battery, allowing to carry the whole assembly into the starting grid if needed. The Pro tyre warmer is available with fixed size 65mm aluminium cups usable for most 1/10th scale touring car rubber tyres or as belt version including size adjustable belted warmers.

Also new is the Batt Warm Box, a heated bag that was developed for the use with the above Pro control unit and to bring LiPo batteries up to a certain temperature during charging. The latter can result in higher overall performance, however before using the unit make sure the track you are running at allows the use of batteries warmers. The bag measures 165x115x40mm which is large enough for two standard size 2S battery packs.

Source: GForce [gforce-hobby.jp]

The post GForce Pro tyre warmer & batt warm box appeared first on Red RC.

Fonte: RED RC.

The first round of the BRCA Scottish GT regionals took place last weekend at Dundee and Angus Radio Control Car Club. This popular series is now in its seventh year of running. The regional series is typically run on smaller club tracks so heats and finals are run with six cars to give the best racing possible. The Dundee club laid a fast and flowing track and with four rounds of qualifying and three finals for all, drivers had plenty of time to show what their cars could do. Qualifying saw a two way battle for pole position between last year’s series winner John Simpson and Kenneth Rogers with these two drivers the only two to reach a 35 lap time. John would line up first ahead of Kenneth. Colin Leslie would line up 3rd ahead of David McLean, David Bruce and Fraser Leslie.

Leg one would see John and Kenneth racing closely for the whole six minutes with John bringing his car home half a second ahead of Kenneth at the finish line. The rest of the field would finish in qualifying order. John would also win leg two giving him the overall victory. The battle for 2nd and 3rd was then hard fought between Kenneth, David and Colin. David took the win in leg three which along with a 2nd place in leg two would give him 2bd place. Kenneth and Colin would tie on points but with the tie break decided on qualifying order meant Kenneth completed the podium. David Bruce would finish 4th and Fraser Leslie 6th.

This was the first round of a three round championship which is looking to be even more competitive this year. The next round is hosted by Lothian Radio Control Car Club in January.

Source: BRCA [brca.org]

The post 2020 Scottish GT Regionals Rd1 – Report appeared first on Red RC.

Fonte: RED RC.

Coming from RC-Project and made for the Mugen MBX8 series of vehicles is an Ackermann steering kit. The set was developed to optimise the steering characteristics of the vehicles by allowing for full steering lock and increasing the steering angle of the outer wheel by 12 degrees. Theis results in better turn in and more consistent cornering while making the car easier and more precise to control in fast sections also. Part of the package are redesigned outer steering spindle plates that offer two different steering link positions, the standard “S” marked position for high-grip and a new aggressive “A” geometry for slippery tracks. The set is machined from high-quality 7075-T6 Ergal material, the parts come with a black surface coating for wear and looks and also included are Reverse-type pivot balls whose updated geometry fine-tune the whole steering system.

Source: RC-Project [rc-project.it]

The post RC-Project MBX8 Ackermann steering kit appeared first on Red RC.

Fonte: RED RC.

Associated Electrics have introduced their new 26oz. aluminium water bottle. Holding 760ml of water or other chilled beverages the black colour bottle is decorated with the AE brand family logos on one side and the original “slot car track” design AE logo on the other. It can be attached it to your gear with the included carabiner for easy storage and transportation.

Source: Associated Electrics [associatedelectrics.com]

The post Associated Electrics 760ml water bottle appeared first on Red RC.

Fonte: RED RC.

The opening round of this season’s Winter Jumps series was held at the popular Fullspeed RC indoor track in Vantaa, Finland with over 90 entries and some world class level of racing. The weekend kicked off with open practice on Friday allowing plenty of time to learn the new layout. Saturday then is for the 2WD class and Sunday the 4WD racing is the order. The race was announced by Karri Salmela with great passion and vast knowledge about drivers and their cars. As for the action on the track, Joona Haatanen was able to TQ both 2WD and 4WD, but it was Pekko Iivonen who managed to take the 2WD victory over Joona while the latter took the win after a really intense fight until the final A3 in 4WD.

2WD final results:
1. Pekko Iivonen – Schumacher
2. Joona Haatanen – Team Associated
3. Jamiel Gabrielsson – Schumacher
4. Konsta Saarinen – Xray
5. Arttu Syrjänen – Team Associated
6. Juha Aromaa – TLR
7. Jere Saarinen – Team Associated
8. Mikko Luopajärvi – Team Associated
9. Jarno Siltanen – Schumacher
10.Joonas Hyvärinen – Schumacher

4WD final results:
1. Joona Haatanen – Team Associated
2. Pekko Iivonen – Schumacher
3. Arttu Syrjänen – Team Associated
4. Jamiel Gabrielsson – Schumacher
5. Markku Honkanen – Team Associated
6. Jarno Siltanen – Schumacher
7. Mikko Luopajärvi – Team Associated
8. Ilmari Ullakko – HB Racing
9. Oskari Mäki – Team Associated
10.Rainer Ressar – Xray

Thanks to Aapo Koro for the report.

The post Iivonen & Haatanen win at Winter Jumps Series Rd1 appeared first on Red RC.

Fonte: RED RC.