The RC Meeting race was held in 2WD and 4WD Buggy classes at the FRCK Furulund club in Sweden this past weekend. In the 2WD Buggy class it was Jessica Palsson with a clean sweep in the triple qualifiers, leaving behind Micke Palsson and Pontus Magnusson in 2nd and 3rd respectively. The triple A-main events again saw Jessica excel and with pretty dominant performances in all three A-finals she would secure the overall from Mike in 2nd and Jonas Johansson in 3rd.

Image: Jessica Palsson

The post Jessica Palsson wins at RC Meeting appeared first on Red RC.

Fonte: RED RC.

The 4th Annual Easy Money Race was held at Thunder Alley R/C Raceway of Beaumont, California this past weekend. The event attracted 65 entries and in the Open Nitro Buggy class it was Anthony Westergaard with the overall TQ and also the win in the 25-minute A-main event, leaving behind Dylan Nelson on the runner-up spot, a lap down. Tyler Brown would come in 3rd, some 22 seconds behind Dylan.

Over in Open Nitro Truggy to was Dylan Elliott with the overall TQ, however the single 25-minute A-main event saw Anthony Westergaard scoring his second win this weekend, leaving behind Bobby Villa in 2nd and Jeremy De Coster in 3rd.

Images: Anthony Westergaard

The post Anthony Westergaard sweeps Easy Money Race appeared first on Red RC.

Fonte: RED RC.

Bill’s RC Hobby Shop And Raceway of Marion, Indiana held their Ice Breaker race this past weekend, attracting 85 entries. 2WD Modified Buggy saw JP Richards taking the day’s win, starting from pole position into the single 6-minutes A-main event. Ean Reilley came in 2nd, some 7.8 seconds behind as Adam Rayls rounded out the top 3 podium result.

Source: Yokomo [teamyokomo.com]

The post JP Richards TQs & wins at Ice Breaker race appeared first on Red RC.

Fonte: RED RC.

The opening round of the 11th Annual Rockstar Winter Off-Road Series hosted by PDX RC Underground saw an impressive 80 entries for the seven classes. In the 2WD Modified Buggy category it was Yokomo’s Joe Pillars with the overall TQ and win from Xray’s Travis Harker on the 2 spot. Yokomo’s Tanner Day would complete the top 3 result.

Over in the 13.5T Wheeler class it was again Joe Pillars with the overall TQ and win as Travis Harker scored a second podium finish that day. Yokomo’s Mike Kozo came in 3rd to round out the top 3 result.

In 40+ Open Buggy Kevin Focht would bring home the win in the single 5-minute A-main event a lap in front of Jim Meyer as Jack Leighan came in 3rd overall.

Source: Yokomo [teamyokomo.com]

The post Pillars doubles at Rockstar Winter Off-Road Series Rd1 appeared first on Red RC.

Fonte: RED RC.

MST are busy teasing more future 1/10th touring car body shells with the latest being an E92 for 200mm drift car chassis. Resembling a German upper class coupe the 257mm wheelbase body shell is of 194mm front and 198mm rear width and it will hit stores at the end of December.

Source: MST [rc-mst.com]

The post MST E92 drift car body shell – Teaser appeared first on Red RC.

Fonte: RED RC.

The Var Automodelisme Pierrefeu club in France played host to the the annual Pierrefeu GP this past weekend. The event attracted the usual breed of national and international drivers and in both 1/8th Nitro Buggy and 1/8th Electric Buggy it was Kyosho’s Riccardo Berton with the overall TQ after the triple qualifiers. Unfortunately soaking wet weather made it impossible to run the finals, meaning the overall results would be based on the qualifying results, handing Ricciardo a double win as Xray’s Yannick Aigoin and Patrick Auvinet Jr. came completed the top 3 results.

Over in E-Buggy it was again Yannick with the overall runner-up spot as new SWorkz signing, Jerome Sartel rounded out the top 3 result.

In the 4×2 class, a France specialty, it was Mathis Meriot Balayre with the win from Sebastien Franco and Alain Canova.

Source: Automodelisme [automodelisme.com]

The post Riccardo Berton sweeps annual Pierrefeu GP appeared first on Red RC.

Fonte: RED RC.

Round 3 of the Danish Electric On-road Nationals were held at the Tinglev club this past weekend. The event saw 90 entries from Denmark and Germany and in the Touring Stock class it was Xray’s Patrick Folman with the overall TQ and also the win after the triple A-main events, leaving behind Tim Benson in 2nd and Awesomatix’ Steven M. Olsen in 3rd.

Over in the Touring Modified class it was Xray’s Patrick Danielsen with the overall TQ, however after the triple A-main events that brought three different winners, it was Xray’s Kevin Nielsen with the overall win, tie on points with Patrick, who had to settle for 2nd after the tie-breaker. Frederik Hovgaard (Yokomo) came in 3rd to round out the podium.

Touring Stock Open saw Villiam Bülow with the overall TQ and he would also come out on top after the A-mains as Lasse Stokholm and Lars Kristensen rounded out the top 3 results.

In the Under 16 category Lasse Stokholm would bring home the win from Villiam Bülow 2nd and Ian Duun Kristensen in 3rd.

In the Formula category it was Michael Johnson (Xray) with the overall TQ and he also walked away with the silverware after the A-mains, as Jesper Rasmussen (Team Associated) and Kim Nielsen (Xray) came in 2nd and 3rd respectively.

Images: William Bang Lomholdt

The post Danish Electric On-road Nationals Rd3 – Report appeared first on Red RC.

Fonte: RED RC.

Coming from SWorkz and made for their S35-3E 1/8th scale electric buggy kit is a wide rear suspension conversion kit. The set contains a CNC-machined and hard-anodised 7075-T6 aluminium main chassis, a lower and wider rear shock tower, redesigned arm mount as well as new design rear hubs. The updated rear end geometry will make for increased corner speed and an easier to drive car and it is the setup of choice for most SWorkz team drivers.

Source: SWorkz [sworkz.com]

The post SWorkz S35-3E wide rear suspension conversion appeared first on Red RC.

Fonte: RED RC.

Samix have introduced their new brass differential cover for the Element RC Enduro trail trucks. Machined from heavy brass material the cover adds 31g of weight to one of the lowest areas of the truck, which will lower the overall centre of gravity while adding traction and helping with climbing performance. In addition the metal part, that replaces the standard composite cover, will add strength and durability. The cover comes black coated for corrosion prevention and looks and it is usable on the front and rear axle housings.

Source: Samix [rcsamix.com]

The post Samix Enduro brass differential cover appeared first on Red RC.

Fonte: RED RC.

Ryan Lutz – Practice laps at IBR Padova with onboard camera.

Alcuni giri sul circuito italiano IBR Padova ripresi con l’action camera GoPro Hero 8 Black montata sull’Agama A319 motorizzata Bullitt B-223 e gommata AKA Typo super soft del pilota statunitense Ryan Lutz.
Leggi anche il reportage di Ryan Lutz sulla Winter Cup svolta all’IBR Padova cliccando QUI.

Fonte: www.lutzrc.com/blog | www.ibr-padova.it

Fonte: RC Revolution.

The folks at RPM are always busy coming up with new heavy duty products for the bashing crowd. The latest product release from the RPM crew are Skid Plates for the Losi Tenacity. The RPM skid plates were designed to take all the abuse, so your chassis doesn’t have to. Here are the details- * […]
Fonte: Big Squid RC.

Axial Racing has not let up on the scale skinny pedal all year and has released another rig! The new Axial Racing SCX10 II Ford F-100 RTR is taking the RTR body game to another level with a four-piece bed and the super scale hinge pin body mounts. The 1955 Ford F-100 is a much-needed […]
Fonte: Big Squid RC.

For all you oval racing fanatics out there, JConcepts has dropped the L8 Night late model oval racing body. The L8 Night is a great blend of performance and scale realism to help put you on the top step of the podium. * Length- 21.38″ * Width- 10.5″ * Height- 4.38″ * DODC approved * […]
Fonte: Big Squid RC.

Coming from Capricorn is a new front end for their 1/12th scale chassis that can also be used across other platforms. Composed of a hybrid setup with a carbon lower arms and composite upper arms, the set will make for a stiffer front end which has proven to perform a lot better in high traction conditions. The carbon lower arm is also more accurate compared to a moulded arm and will not twist in the event of a crash. In addition the design allows the use of optional lower arms, resulting in a more precise setup for different track conditions. The fixing points of the lower arms to the chassis are of a 38.5mm spacing so the front end will be a direct bolt to most other 1/12th chassis also.

Source: Capricorn [capricornrc.com]

The post Capricorn LAB P12 Evo International front end kit appeared first on Red RC.

Fonte: RED RC.

The XRS EuroRC Finland race will be held on the 23rd of November at the Fullspeed Racing Circuit in Hakkila near Helsinki, Finland. The event sees the running of Touring Modified and Stock classes as well as FWD, 1/12th LMP and GT12 racing and more information can soon be found here.

Source: Xray [teamxray.com]

The post XRS EuroRC Finland – Announcement appeared first on Red RC.

Fonte: RED RC.

New from Tekno RC is the EB410.2 tenth scale competition buggy. Tekno has a great reputation for speed and durability, the EB410.2 brings even more excitement to the 4wd racing class. Here are the highlights- * New front sway bar system * Upgraded shock pistons * Revised shock towers * New rear arms w/ front […]
Fonte: Big Squid RC.

Reinvented with modern technology and Team Losi Racing engineering, the Losi Mini-T 2.0 1/18th-scale 2WD Truck honors the heritage of the original Mini-T with features and options never dreamed of back in the day.

Fonte: Team Losi Racing.

Tekno RC have introduced the .2 variant of their popular EB410 1/10th scale 4WD buggy kit. The kit features many of the updated components from the ET410 platform but also several all-new elements have been included to further improve handling and durability. Now part of the package is a front end sway bar system along with new 15-degree low roll centre spindle carriers. The suspension has been upgraded with new pistons and revised shock towers. In the rear, Tekno RC have included new arms that allow front-mounted shocks, new adjustable roll centre rear hubs, and a new, taller one-piece wing mount to help improve aerodynamics and roll characteristics. Durability has also been improved with a new spur gear, a front bulkhead brace, heavy-duty ABCD hinge pin braces, and larger 3.5mm inner hinge pins. Kits are expected to ship by mid-November.

Key features:
– Revised CNC 7075 long wear chassis
– New larger 3.5mm HD hinge pins and revised hinge pin inserts
– New ABCD hinge pin braces w/ revised suspension geometry
– New taller, stronger one-piece wing mount w/ height adjustments
– 13mm big bore shocks w/ revised cartridge and cap bushing
– Ultra secure locking spring perch design
– New rear arms w/ front mounted shocks
– New adjustable roll centre rear hubs
– New 15 degree LRC spindle carriers
– New aluminium front camber plate w/ bulkhead brace
– Revised material 81T spur gear
– Front and rear sway bars now included
– Large wheel bearings and 6mm HD stub axles
– Newly optimised reverse bellcrank steering system

Source: Tekno RC [teknorc.com]

The post Tekno RC EB410.2 1/10th 4WD buggy kit appeared first on Red RC.

Fonte: RED RC.

Yeah Racing have introduced their new Big Bore Go pre-built aluminium shock absorbers. Ready to go right after adding the desired shock fluid, the dampers are available in 50mm and 55mm specification, allowing to use them in a range of applications such as touring and drift cars. Included in the sets come two different types of mounting ball studs as well as a range of springs and even pistons to fine-tune the units. Threaded aluminium shock bodies, anodised upper and lower caps as well as chromed shock pistons make for a high-quality appearance and long life. The shock sets are available in blue or black colour from now on.

Source: Yeah Racing [yeahracing.com]

The post Yeah Racing Big Bore Go 50mm & 55mm shock absorbers appeared first on Red RC.

Fonte: RED RC.

Shepherd have announced the release of their advanced weight system for the Velox V8.2 1/8th on-road kit. This set of optionals has already shown its potential at this year‘s World Championship and it is a direct replacement for the regular or brass battery mount. Included in the set are an aluminium tray made of high-quality 7075-T6 aluminium, two 18g balancing weights, a high quality carbon brace for the battery and all necessary mounting hardware. The needed mounting positions for the battery have been included in the radio plate of the Velox V8.2 so no DIY drilling is needed. The 18g weights are equipped with additional countersunk holes, making it possible to stack the weights if needed, with a total of five weights can be used in the aluminium tray. The set as well as all individual items are available from now on.

Source: Shepherd [team-shepherd.com]

The post Shepherd Velox V8.2 advanced weight system appeared first on Red RC.

Fonte: RED RC.